ATI Omni Hybrid P4 ATIGOMX300P4B Complete Specs and Full Gun Specifications

Our OMNI HYBRID P4 features a fully-patented metal reinforced polymer upper receiver along with a fully-patented metal reinforced polymer lower receiver. The Omni Hybrid lower features a patented hammer and trigger pin retainment system, preventing movement from the hammer and trigger pin during firing. The Omni Hybrid also features our patented over-molded metal inserts, which reinforce the buffer tube housing and rear takedown pin as well as reinforce the front take down pins. This allows for metal-on-metal contact with both the buffer tube as well as the rear takedown pin thus increasing strength and durability from recoil and consistent firing. Specifications: Rail: 7" Keymod Free Float Gas Block: Low Profile Rate-of-Twist: 1:8" Pistol Brace 8.5" 1:8 Twist Nitride 300 Blackout  Barrel
98
out of 10
10 Positive, 0 Mixed & 0 Negative
from 10 Reviews
Retail Price:
$306.42
Used Price:
$214.49
Sale Price:
$214.49

Product Specifications

Category Handguns
Gun Type Pistol
Action Semi-Auto
Caliber 300 AAC Blackout
Barrel Length 7"
Capacity 30
Finish Black

ATI Omni Hybrid P4 ATIGOMX300P4B Reviews

Unknwon
Chance H
February 10, 2022
100

Took it out to the range last weekend. Only went through 100 rounds to test it & no problems what so ever. Under $400 is a bargain in my opinion. Love the 300 Blackout round!

Unknwon
Kerry T
February 10, 2022
100

This was my 3rd purhace from Bud's Guns & was a really good experience again ! Very quick shipping (2 business days) each time . Now as for the pistol , if you are into AR pistols you can't go wrong with this one . I bought the .223/5.56 version a few wee

Unknwon
Alteva A
February 10, 2022
100

Great pee shooter to have on hand, just in case...light enough to be useful in tight situations.

Unknwon
Jerald S
February 10, 2022
100

I'm happy! Especially for the price. Recoil is smoother than the bang. Ran it pretty good at 100 yds (Scopes needed)and it stayed cooler than what I expected and still made a good impact on target. No complaints.Nice gun. Great service!

Unknwon
chong l
February 10, 2022
80

So far I've put 90 rds of 125gr 2000fps ammo. No issues, the trigger is a little spongy & it's been a little wierd getting used to the feel of an all poly ar pistol. All in all, good bang for buck & will make a really nice truck gun that can take a beatin

Unknwon
Karlis E
February 10, 2022
100

Exactly what I was looking for. Runs great. Looking to pick up more in different calibers. Highly recommend

Unknwon
E.D. C
February 10, 2022
100

Bought two of these. Impressed with the look. I have ordered som dress up hardware. Love the low price. And fast shipping. Quality seems to be good. I will update this when I’ve put some rounds thru it

Unknwon
Sharon C
February 10, 2022
100

Waiting for mine to arrive to my local FFL dealer. They actually told me they get a lot of good reviews from buds gun shop. So I’ll update y’all when it arrive.

Unknwon
Janet S
February 10, 2022
100

Got this a couple of weeks ago and finally put some rounds down range. Comes with no sights so I put a $59 TruGlo on it. Had it hitting what the green dot was on after about 6 shots. Shot 60 rounds through it with no malfunctions. The weapon feels goo

Unknwon
Badr A
February 10, 2022
100

It was so worth it. Nice gun!! Beautiful gun and i love buying here!!

ATI Omni Hybrid P4 ATIGOMX300P4B Questions and Answers

Asked by dev02 6 years ago

Muzzle Threads

Unknown 6 years ago

Andrew, yes Sir. The Barrel Thread Pitch is 1/2x28.

Unknown 6 years ago

Austin, this is a "Davidson's Exclusive" firearm. They are made specifically per retailer specifications and do not appear on the RIA/Armscor website. galleryofguns.com/gallery/exclusives.aspx

Unknown 6 years ago

Austin, The firearm is probably not made in this platform with the nice grips and cerakote treated slide any longer. Certainly not a "custom" 1911 for under $500. Standard Armscore/RIA 1911 with some cosmetic enhancements.

Asked by dev02 6 years ago

stock

Unknown 6 years ago

James, this pistol has a Brace else it would be a Short Barreled Rifle and need to have a $200 Tax Stamp paid and NFA registration. The Brace does have a set screw to adjust the length.

Unknown 6 years ago

James, This is a pistol brace not a stock. It is not designed to be adjustable. It is illegal to put rifle stock on this pistol. Makes it an SBR.

Unknown 6 years ago

The brace is held in place by screws that tighten around the buffer tube so not like a regular rifle stock that is adjustable with some type of plunger. You may be able to loosen it and tighten it down further back but it is really not designed to be long

Unknown 6 years ago

You could contact Buds customer service (859) 368-0371 9am-9pm mon-fri or use the blue Chat Now button and ask but I doubt they would know my other suggestion is to contact B&T B&T USA 4532 W. Kennedy Blvd. Suite 111 Tampa, FL 33609 Phone: 813-653-1200 Em

Unknown 6 years ago

Please click the green box stating it as the best answer. We are rated on our answers and are just volunteers, not Buds employees. You can choose more then one Thank you!

Unknown 6 years ago

Hi Adair, This is the Gen 2 GHM9

Unknown 6 years ago

Hi Adair, since Buds sometimes uses old stock photo's I would ask them directly at via LiveChat (available from 9AM to 9PM 7 days a week), the "blue chat now" button at the bottom right of the page, or phoning at (859) 368-0371 (available 9AM to 9PM EST M

Asked by dev02 6 years ago

Ammunition

Unknown 6 years ago

Josh, no Sir. 300Blk is a 30 Caliber Round and 5.56/.223 are 22 Caliber. All you would need my man is a 5.56 Upper to attach to this lower as the lower is universal to both calibers.

Unknown 6 years ago

DO NOT TRY TO USE 223 OR 5.56 NATO ammo in this gun it is chambered for 300 blackout ammo , also known as 7.62×35mm

Unknown 6 years ago

Josh, No, this firearm is a 300 blackout firearm not .223/5.56 firearm. Barrel and chamber are much larger for the 7.62 diameter round. 5.56 diameter would be dangerous to fire from that dimension chamber and barrel.

Unknown 6 years ago

No Josh, this is a 300 Blackout model ..chambered in 300 Blackout, it only functions with 300 Blackout ammunition (AKA 300 AAC) Can't use 223 or 5.56 in this one.

Unknown 6 years ago

Yes it is made in Italy

Unknown 6 years ago

Yes Dusko, this one is made in Italy in he original Beretta factory.

Unknown 6 years ago

Dusko, yes, this Pistol is manufactured in Italy Sir.

Asked by dev02 6 years ago

Rails

Unknown 6 years ago

Josh, there are KeyMod Slots same as on the sides for the addition of a KeyMod Rail Section such as (Examples Lengths) : budsgunshop.com/catalog/search.php/type/Accessories/q/Keynod%20rail%20section/sort/relevance

Unknown 6 years ago

no it is not a threaded barrel

Unknown 6 years ago

John, no, this model has a 5.3" non threaded barrel.

ATI Omni Hybrid P4 ATIGOMX300P4B Price History